Website author headshot
Cameron Oatley
ExtremeHiFi
Website author headshot
Julian Shapiro
ExtremeHiFi

Note that this is a discontinued product. You may want to visit the brand's page here to browse their newer products.

What reviewers think

Bloggers and YouTubers have tried this product—so we've summarized their strongest opinions below. Links to full reviews follow.

Product Strengths

  • Fantastic overall sound quality with rich, powerful bass, a very musical midrange, and a clean, smooth treble response
  • Beautiful cosmetic design and built like a tank
  • Very black musical background
  • Good sense of dynamics, pinpoint imaging, and sound staging
  • Equal power into either 8 or 4-ohm loads

Product Considerations

  • Cannot dim or completely turn off the front panel lights or power meters
  • The chassis is very deep
  • Power supply generates an audible hum, though McIntosh says that this is normal
  • The XLR connectors are of the non-locking type

Comparisons (according to reviewers)

  • MC8207 is a lower-cost alternative to the then $9,500 MC207 flagship multi-channel amp
  • MC8207 used regular coated and rolled steel, while MC207 has a solid stainless-steel chassis, covers, and heatsinks
  • MC8207 has less expensive 'Ilumeter' displays instead of the expensive glowing blue analog VU meters of the MC207
  • The "Meter Off" and "Watts Hold" knobs of the MC207's front panel were replaced with a single power switch on the MC8207

Takeaway: The McIntosh MC8207 offers a combination of beautiful design, impressive build quality, and excellent overall performance. It has a signature house sound consisting of a rich midrange, clean, sweet treble, and potent bass output—which is a treat for audiophiles.

All

MC8207

reviews

[{"title":"MCINTOSH MC8207 MULTICHANNEL AMPLIFIER REVIEW","link":"https://hometheaterhifi.com/reviews/amplifier/power-amplifier/mcintosh-mc8207-multichannel-amplifier-review","source":"Home Theater Hifi","datePublished":"2023"}]
An excellent review of a great product
/
Publisher
/
3/1/2022
An excellent review of a great product
Publisher
/
3/1/2022

Manufacturer's details

  • FTC Power Output Rating: 200 W
  • Power Output per Channel: 200 W into 4 or 8 ohms
  • Number of Channels: 7
  • Total Harmonic Distortion: 0.005%
  • S/N below rated output: 112dB
  • Dynamic Headroom: 1.7dB
  • Damping Factor: >140
  • Rated Power Band: 20Hz to 20kHz
  • Frequency Response: +0, -0.25dB from 20Hz to 20kHz; +0, -3dB from 10Hz to 100kHz
  • Unit Dimensions (W x H x D): 17-1/2" (44.5cm) x 9-7/16" (23.9cm) (including feet) x 21" (53.3cm) (including front panel and cables)
  • Unit Weight: 83 lbs (37.6 kg)
  • Shipping Weight: 116 lbs (52.6 kg)
At 200 Watts per channel, the 7-channel MC8207 home theater amplifier is perfectly capable of powering all the speakers in a 7.1 channel home theater to McIntosh's legendary standards. It features LED power output indicators instead of our traditional blue meters. These indicators will display the amplifier's power output just as the blue meters do but in a more understated way – making the MC8207 a perfect choice for darkened home theaters where the screen is the focal point.
At 200 Watts per channel, the 7-channel MC8207 home theater amplifier is perfectly capable of powering all the speakers in a 7.1 channel home theater to McIntosh's legendary standards. It features LED power output indicators instead of our traditional blue meters. These indicators will display the amplifier's power output just as the blue meters do but in a more understated way – making the MC8207 a perfect choice for darkened home theaters where the screen is the focal point.

In addition to 7.1 theater systems, it can also be used in 5.1 home theaters with 2 channels used to power a second zone in stereo mode. The McIntosh exclusive Dynamic Power Manager® (DPM) technology enables the MC8207 to deliver its full power into both 4 and 8 Ohm speakers, meaning it's compatible with a wide variety of home theater speakers – unlike many other high current amplifiers.

Just like our other home theater amplifiers, the MC8207 does not need cooling fans, eliminating fan noise that can interfere with the delicate nuances of a movie's soundtrack. Power Guard® will prevent potential speaker damage caused by clipping and over-driving of the amplifier. Short-circuit protection is provided by Sentry Monitor™ that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal.
Manufacturer Site

Brand highlights

We analyzed reviewers' thoughts of the brand's entire lineup—not just this product—and what stands out most is the following:

  • McIntosh products blend classic, retro aesthetics, reminiscent of their 1970s designs, with modern materials and cutting-edge internal components, offering a unique visual appeal.
  • The brand's amplifiers are known for their substantial power output, often exceeding specifications, and their ability to drive a wide range of speakers across varying impedance levels due to their unique Autoformer technology.
  • McIntosh offers a high degree of customization and control through features like multi-band equalizers, adjustable input sensitivity, and advanced settings accessible via dedicated apps or web interfaces.
  • They distinguish themselves with a focus on long-term reliability and customer satisfaction, with products built to last for decades and supported by a dedicated dealer network.

Every McIntosh amplifier shares the house sound, warm and full in the midrange, and the autoformers let the power amplifiers drive speakers of nearly any impedance. The MHA50 is a portable DAC and amp that gives headphones that sound for up to six hours on Bluetooth. The MA352 doubles the MA252's 100 watts to 200 watts per channel, so it drives larger speakers in a bigger room. The MA12000 reaches 350 watts per channel with a tube preamplifier stage, enough for very demanding speakers in a large room.

  • Start here. A headphone listener on a tight budget who wants the McIntosh sound while moving around should choose the MHA50, since it runs on battery.
  • Sweet spot. The MA252 suits a first McIntosh stereo system, since one box takes four analog inputs, has bass and treble controls and drives a pair of speakers directly.
  • All in. The MA12000 extends the MA9500's recipe, and its 350 watts against 300 give an owner of power-hungry speakers louder peaks with more reserve, as McIntosh's most powerful integrated amplifier.
All products from this brand
Avg. Product Price
$5,001-$10,000
Used For Sale
537
 Available (Scroll Down)
Brand Popularity
2
 of 900+
Badges
Top 50 Brand
Top 250 Brand
Products Listed
77
Founding Year
1949

Our take on the brand

McIntosh is the amplifier with the blue meters, the hifi brand people outside the hobby are most likely to recognize, built in Binghamton, New York since 1951. Its amplifiers use McIntosh's own autoformers, which let them drive a wide range of speakers whatever their impedance, and the house sound is warm and full in the midrange, closer to a tube amplifier than most solid-state designs. The company still builds tube amplifiers too, the MC275 among them, and the glass front panels are lettered from behind so the printing never wears.

Look inside the brand

Brand Page

Our interview with the brand

What are two key technological innovations or strong opinions that differ you from other brands?

What's your approach to customer support?

What are your favorite tracks for showcasing the strength of your products?

What other products pair best with yours?

From our interview with
.
Brand page

What if you spend more?

Product image
McIntosh
MC2301
13500
13500
/
1
Reviews

The MC2301 is the first McIntosh vacuum tube amplifier to use our Quad Balanced design. This design cancels virtually all noise and distortion in the audio signal. As a result, even when amplified to high levels the signal is effectively free of any distortion. Our fuse-less short-circuit protection circuit Sentry Monitor™ disengages the output stage before current exceeds safe operating levels and then resets automatically. Inputs for balanced and unbalanced cables are available to provide flexibility in connecting the rest of your audio system.

McIntosh is the amplifier with the blue meters, the hifi brand people outside the hobby are most likely to recognize, built in Binghamton, New York since 1951. Its amplifiers use McIntosh's own autoformers, which let them drive a wide range of speakers whatever their impedance, and the house sound is warm and full in the midrange, closer to a tube amplifier than most solid-state designs. The company still builds tube amplifiers too, the MC275 among them, and the glass front panels are lettered from behind so the printing never wears.
Check Amazon
Expand Details

Product Strengths

  • Fast response, with detail, and a warm tube sound
  • Picks up detail with speed when playing Hi-Res digital content

Product Considerations

  • Lacks sound stage depth/width, power, and feel compared to the reference system (vintage MC275 amplifiers)
  • Super tweeters seemed to be sleeping—as if there was no data provided at that frequency
  • Lacks a big window of performance, energy, and feel, providing a smaller window of performance albeit nice with a tube-like sound
  • Bass with the MC2301s was starving when compared to the 275's

Comparisons (according to reviewers)

  • Vs vintage 1960s MC275: MC2301 lacks sound stage depth/width, power, and feel, a full rich lush enveloping sound, and energy that stirs emotion
  • Vs later generations of the MC275: MC2301 would be superior

Takeaway: If you don't have access to vintage MC275s, the MC2301 could be a good option, providing a tube-like sound with detail and speed. McIntosh should look back and reconsider past designs.

Video review

Our take on the brand

McIntosh is the amplifier with the blue meters, the hifi brand people outside the hobby are most likely to recognize, built in Binghamton, New York since 1951. Its amplifiers use McIntosh's own autoformers, which let them drive a wide range of speakers whatever their impedance, and the house sound is warm and full in the midrange, closer to a tube amplifier than most solid-state designs. The company still builds tube amplifiers too, the MC275 among them, and the glass front panels are lettered from behind so the printing never wears.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
Product image
Chord Electronics
Ultima
15375
15375
/
8
Reviews
Check Amazon
Expand Details

Product Strengths

  • Offers a remarkably smooth, unforced, and natural presentation with a touch of warmth
  • Excels in detail retrieval and textured presentation of instruments and vocals, making the music feel alive
  • Presents a wide and holographic soundstage, especially when paired with speakers that are already strong in this area
  • Demonstrates agility, precision, and clarity, combined with a naturalness that eluded earlier generations of Chord amplifiers
  • Scales dynamically and has the ability to punch hard when required

Product Considerations

  • Has a minimalist design with just four line-level inputs, lacking features like phono stages, tone controls, headphone outputs, or DAC modules
  • Some may find its sonic signature prioritizes articulation over qualities such as richness and authority, potentially sounding thin if partnered poorly
  • Balance control has no center indent or marked position
  • The polychromatic lighting may be an issue for the color-blind
  • Remote operation can be affected by direct sunlight

Comparisons (according to reviewers)

  • Vs Rega Elex-R Mk3, the Chord Ultima Integrated delivers undeniably elevated sound in all respects, with greater dimensionality and smoother vocals
  • Vs Bryston 7B 3 monoblocks, the Chord Ultima Integrated offers a weightier and more thunderous delivery, especially in the midrange and vocals, with more inner warmth in tone
  • Vs Benchmark AHB2, the Chord Ultima Integrated provides a more energetic and fun listening experience, with Thor-like bass impact and overall superior dynamics
  • Vs Accuphase E-270, the Chord Ultima Integrated is warmer, rounder, more powerful, and refined, with a more fluid and emotionally engaging performance

Takeaway: The Chord Ultima Integrated is a unique and well-built amplifier that combines a visually pleasing design with a captivating sound, full of detail and dynamic precision. It brings music to life with an engaging and immersive experience, making it a worthy addition to any audiophile's setup.

Video review

Our take on the brand

Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
Product image
AGD
Duet
11500
11500
/
7
Reviews

The AGD DUET Monoblock Amplifier, is the newest addition to our state of the art Hi-End Power Amplifiers family. The AGD DUET is our first compact Monoblock Amplifier utilizing 100% Gallium Nitride Power MOSFET design for both the output power stage and the power supply.

AGD Productions is an American amplifier maker, founded by Alberto Guerra. The California company's amplifiers use gallium nitride (GaN) MOSFET power stages switching at around 800 kHz, and in the GaNTube models the output stage is housed in a glass tube like a vacuum tube. The tube unplugs, so owners can upgrade to a newer GaNTube without replacing the amplifier. AGD aims for single-ended tube musicality with class D control. AGD's monoblocks are sold in pairs, and the Audion and Vivace are on our All Monoblock Amplifiers list.
Check Amazon
Expand Details

Product Strengths

  • Compact size, lightweight, and runs cool compared to traditional high-end amplifiers
  • Exceptionally quiet operation, with reviewers noting a complete absence of hum or buzz
  • Delivers a clean, crisp, and neutral sound signature without added coloration
  • Upgradeable design, allowing users to update the amplifier with new GaN modules as technology evolves
  • Produces a Single Ended Triode-like midrange and top end

Product Considerations

  • The polished finish is a fingerprint magnet, requiring the use of gloves for handling

Comparisons (according to reviewers)

  • Vs AGD Audion MKIII: The Duets offer a cleaner and more refined sound with improved bass and greater immediacy and snap compared to the Audion MKIII
  • Vs Daniel Hertz Maria: The AGD Duets seem to have a little more inner resolution
  • Vs Pass Labs X250.8: The AGD Duets performed to a higher level
  • Vs Peachtree GaN 1/VTV GaN amps: AGD amps seem to be on another level in regards to design, and the sound is more refined and beautiful
  • Vs Aavik U-150, Luxman 595, Yamaha A-S 3200, Axxess Forte 1, Line Magnetic 219ia: The AGD Duets performed to a higher level

Takeaway: The AGD Duet amplifiers offer a blend of cutting-edge technology, exceptional sound quality, and user-friendly design. They are a great option for those seeking a high-end audio experience in a compact and energy-efficient package.

Video review

Our take on the brand

AGD Productions is an American amplifier maker, founded by Alberto Guerra. The California company's amplifiers use gallium nitride (GaN) MOSFET power stages switching at around 800 kHz, and in the GaNTube models the output stage is housed in a glass tube like a vacuum tube. The tube unplugs, so owners can upgrade to a newer GaNTube without replacing the amplifier. AGD aims for single-ended tube musicality with class D control. AGD's monoblocks are sold in pairs, and the Audion and Vivace are on our All Monoblock Amplifiers list.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
Product image
ASR
Emitter II
18750
18750
/
6
Reviews

The Emitter II models are considered by real music connoisseurs and uncompromising audiophiles to be the ultimate in amplifier construction. Almost purely by hearsay, a music-addicted and ever-growing fan base has developed worldwide, which has realized its dream of a concert hall in its own home. 

​

Powered by two separate power supplies, the most sophisticated loudspeakers and elaborately constructed dynamic converters are driven to peak sound performance. With an Emitter II Basic, music unfolds in the full dynamic range. From the breath to the slightest rustle on the stage to the power of the full orchestra, the Emitter II Basic reproduces all tones neutrally, powerfully, energetically, with high resolution and unadulterated in the listening room. 

​

Especially at peak levels at concert volume, the playback and spatial imaging remain absolutely stable. Quiet listeners also rave about the noticeable and very pleasant energy in the sound, which makes the music a relaxing and pleasant experience even at low levels.

ASR is a German amplifier maker, founded in 1980 by Friedrich Schäfer and Michael Rompf. Its Emitter integrated amplifiers and Basis phono stages draw on large separate power supplies, with a battery option, to keep noise out of the signal. The Emitter's volume control changes the gain instead of attenuating the signal. ASR aims for the ease of a fine tube amplifier with the power and control of a transistor design, and builds everything by hand in Germany. The Mini Basis is the smaller phono stage, voiced for listeners who prefer a warmer sound.
Check Amazon
Expand Details

Product Strengths

  • Known for combining the musicality of tube amplifiers with the precision and power of solid-state amplifiers.
  • It provides a transparent sound with steel control, without the electronic 'shine' associated with transistor amplifiers.
  • Exceptional bass performance, described as deep, explosive, and completely controlled.
  • Homogeneous frequency range, offering a very high degree of transparency and control.
  • Offers an ability to resolve even the finest musically significant details.

Product Considerations

  • Requires a substantial amount of space due to its multi-component design.
  • The sound offered might be 'too beautiful' for some listeners, as it is not 'brutal' or 'terse' enough.
  • Requires care in using its switches to avoid shutdowns.
  • Some reviewers note it was 'dark sounding' on the highs, though it did not lack information.

Comparisons (according to reviewers)

  • Compared to Quad ESL loudspeakers, it surpasses the musicality and clarity achieved with many tube amps, rivaling even high-end options like Lamm Industries ML2.2 and Miyajima Laboratory 2010.
  • The ASR has better bass and is more transparent than MBL, however, it lacks the grace that MBL offers.
  • Compared to Rogue 180W monoblocks, the ASR Emitter II delivers better bass.
  • The ASR Emitter II has slightly better bass control than Manley Neoclassic 500, but the Neoclassic 500 has a more marvelous style of fiddling.
  • Compared to Edge and Audio Research, the ASR is darker sounding.

Takeaway: The ASR Emitter II Exclusive offers a combination of tube-like warmth and solid-state precision, making the listening experience a very involving one. It provides exceptional control and detail across the entire frequency range, making it a great choice for audiophiles.

Video review

Our take on the brand

ASR is a German amplifier maker, founded in 1980 by Friedrich Schäfer and Michael Rompf. Its Emitter integrated amplifiers and Basis phono stages draw on large separate power supplies, with a battery option, to keep noise out of the signal. The Emitter's volume control changes the gain instead of attenuating the signal. ASR aims for the ease of a fine tube amplifier with the power and control of a transistor design, and builds everything by hand in Germany. The Mini Basis is the smaller phono stage, voiced for listeners who prefer a warmer sound.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page

What competes at this price?

Primare
A35.8
5247
/
Released
2022
The A35.8 is Primare's most powerful and flexible multi-channel amplifier, designed to serve the needs of virtually any high-performance multi-channel system through its ability for each pair of channels to be bridged to mono for an incredible level of power delivery and system building options, including 1500 watts of total output in a fully bridged bi-amped stereo configuration.
Check Amazon
Primare is a Swedish hifi electronics maker based in the south of the country. Many of its amplifiers use UFPD 2, an in-house Class D design, and its circuits use ultra-short signal paths and fewer parts. Prisma is its own streaming and multi-room platform, and many models are modular, so a DAC or Prisma module can be added later. The I35 can start as an integrated amplifier and grow into a streamer, and the SPA25 Prisma adds Dirac Live and Dolby Atmos for home cinema.
Expand Details

Our Summary

Product Strengths

  • The A35.8 provides eight channels of 'unimpeachable Class D power in a fairly compact and very flexible package'
  • Flexible configuration options for power output to speakers are available, such as bi-amping and bridging
  • Each stereo pair can be bridged separately to make four times 375 watts (8 Ohms) from the eight times 150 watts
  • Fault-free sound quality
  • High quality fit and finish
  • The A35.8 offers flexible connectivity options

Product Considerations

  • The 20-amp power inlet is the seldom-seen variety with three horizontal blades
  • The speaker output posts are spaced too widely for dual-banana plugs
  • Cabling can be tricky
  • A high current power cord is needed
  • Lower gain is present, though this doesn't necessarily need to be an issue

Comparisons (according to reviewers)

  • Vs NAD M28, the A35.8 gets you one more channel and more versatility for a 10% price increase
  • Vs Benchmark AHB2, the Benchmark presented a more neutral tonal balance and undistorted soundstage
  • Vs NAD C 298 stereo amplifiers, the Primare seemed slightly more forward, often conveying an appealing liveliness

Takeaway: The A35.8 power amplifier is a flexible and versatile product worth considering for anyone seeking a high-quality multi-channel setup. Its ability to bridge channels offers many ways to configure your speaker system.

Video review

Our take on the brand

Primare is a Swedish hifi electronics maker based in the south of the country. Many of its amplifiers use UFPD 2, an in-house Class D design, and its circuits use ultra-short signal paths and fewer parts. Prisma is its own streaming and multi-room platform, and many models are modular, so a DAC or Prisma module can be added later. The I35 can start as an integrated amplifier and grow into a streamer, and the SPA25 Prisma adds Dirac Live and Dolby Atmos for home cinema.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
EAR Yoshino
EAR 890
6351
/
Released
Push-pull power amplifier using eight KT90 output valves (four per channel). 70 Watts per channel stereo (bridgeable to 140 watts mono) into 4, 8, or 16 ohms. Self-biasing design with Balanced or unbalanced input.
Check Amazon
EAR Yoshino is a British maker of tube amplifiers, preamplifiers and phono stages. Its designs often use transformers at both input and output, even in some solid-state circuits, for a more tube-like character. Many of its phono stages and preamps have front-panel impedance and capacitance controls, so owners can set them up for different cartridges. Reviewers describe a rich, harmonic house sound that suits a wide range of speakers. The EAR 912 is the flagship phono preamp, and the EAR 834P is on our Best Phono Preamps and All Tube Preamps lists.
Expand Details

Our Summary

Product Strengths

  • The EAR 890 produces 70Wpc in stereo, and can be bridged to 140W in monoblock
  • Neutral sound that gets out of the way and lets the user enjoy the music
  • Complex and dense music textures are handled with ease, and dynamically demanding passages are sailed through
  • Articulate midrange
  • Detailed and realistic bass

Product Considerations

  • Removing/installing tube cages is difficult and time-consuming
  • The loudspeaker binding posts are positioned too close to the output transformers, making it hard to tighten them properly
  • Some assembly work appeared amateurish, specifically the use of silicone in various locations, such as fastening chassis wires
  • The amplifier can operate quite hot
  • May not have as much bass impact compared to solid state amps

Comparisons (according to reviewers)

  • The EAR 890 monoblocks achieve SET-like definition along with the authority and swagger necessary for most full-size speaker systems, when compared to Cary Audio 300B SET amps
  • The EAR 890 is as textured as the top LAMM designs, but with noticeably better neutrality and more power
  • The EAR 890 surpassed the deHavilland KE50As with a more articulate midrange, producing more color and separation in the microtones of instruments

Takeaway: The EAR 890 is easy to set up and sounds good with very little tweaking, making it easy to just sit back, relax, and enjoy the music. It's a good choice for people who want a tube amp that is both musical and powerful for their home listening experience.

Video review

Our take on the brand

EAR Yoshino is a British maker of tube amplifiers, preamplifiers and phono stages. Its designs often use transformers at both input and output, even in some solid-state circuits, for a more tube-like character. Many of its phono stages and preamps have front-panel impedance and capacitance controls, so owners can set them up for different cartridges. Reviewers describe a rich, harmonic house sound that suits a wide range of speakers. The EAR 912 is the flagship phono preamp, and the EAR 834P is on our Best Phono Preamps and All Tube Preamps lists.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
Parasound
Halo A51
5749
/
Released
The Parasound A51 is a high-powered five-channel amplifier designed to bring your home theater system to life. Delivering 250 watts per channel at 8 ohms, the A51 ensures powerful, clean, and dynamic sound across all five channels. This amplifier is THX Ultra2 certified, providing exceptional performance for even the most demanding speaker systems.
Check Amazon
Parasound's reference amplifiers are built around the circuits of John Curl, and the JC models are named for him. The American company was founded in San Francisco in 1981 to bring audiophile performance below audiophile prices. The JC and Halo reference lines use dual-mono construction and high-bias Class A/AB output stages, and the JC5 runs its first 12 watts in pure Class A. ZoneMaster and ZCustom amplifiers cover whole-home and custom installations. The Halo HINT6 adds a DAC and phono stage for a one-box system, and the JC1+ heads our All Monoblock Amplifiers list.
Expand Details

Our Summary

Product Strengths

  • Delivers amazing quality of sound and detail
  • Bulletproof amplification
  • Has a rhythmically soulful sound with a tremendously rich and natural midrange
  • The A51's bass is well-defined, extremely textured, and robust
  • With 250 watts on tap, the Parasound A51 will power virtually anything

Product Considerations

  • Due to its class A/AB design, the A51 does get a bit warm and should be installed in a properly ventilated space and/or rack
  • The A51 is large and heavy, and is best moved and/or positioned by two people

Comparisons (according to reviewers)

  • Compared to Rotel, the Rotel makes the M&K Sound system slightly bright with a bit of sibilance, while the Parasound is more neutral
  • Compared to Acurus A250, the Parasound had tighter bass, which is probably attributed to a better damping factor

Takeaway: The Parasound Halo A51 is a high-performance amplifier with great sound quality, detail, and build quality, making it an excellent choice for audiophiles and home theater enthusiasts. Its ability to deliver power and control to speakers makes it a valuable addition to any high-end audio system.

Video review

Our take on the brand

Parasound's reference amplifiers are built around the circuits of John Curl, and the JC models are named for him. The American company was founded in San Francisco in 1981 to bring audiophile performance below audiophile prices. The JC and Halo reference lines use dual-mono construction and high-bias Class A/AB output stages, and the JC5 runs its first 12 watts in pure Class A. ZoneMaster and ZCustom amplifiers cover whole-home and custom installations. The Halo HINT6 adds a DAC and phono stage for a one-box system, and the JC1+ heads our All Monoblock Amplifiers list.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
AGD
Tempo di GaN
5500
/
Released
2021
Check Amazon
AGD Productions is an American amplifier maker, founded by Alberto Guerra. The California company's amplifiers use gallium nitride (GaN) MOSFET power stages switching at around 800 kHz, and in the GaNTube models the output stage is housed in a glass tube like a vacuum tube. The tube unplugs, so owners can upgrade to a newer GaNTube without replacing the amplifier. AGD aims for single-ended tube musicality with class D control. AGD's monoblocks are sold in pairs, and the Audion and Vivace are on our All Monoblock Amplifiers list.
Expand Details

Our Summary

Product Strengths

  • GaN technology allows for efficient power usage, with 94% of energy being turned into sound
  • Compact size challenges the notion that high-quality amps need to be large
  • Design and packaging create pride of ownership
  • It can be run in bridged mode to deliver 400 watts into one channel
  • Stability and ability to handle complex impedance loads

Product Considerations

  • The slight sonic signature may not be for everyone
  • If truly outrageous amounts of power are needed to drive speakers, a second AGD Tempo amp might be needed to run in a bridged configuration
  • High-frequency noise was discovered when XLR cables were not connected between them
  • Power cords can make a large difference, the included power cord doesn't flatter the amp
  • Some traditionalists may find it hard to accept that it's a Class-D amplifier

Comparisons (according to reviewers)

  • Compared to Peachtree Audio GaN400, the AGD Tempo reports to have better overall specifications
  • Compared to Parasound Halo A21+, the AGD Tempo is simply superior
  • Compared to Bricasti M30 monoblock amplifiers, the level of which the most subtle detail exists approaches reference Bricasti M30 monoblock amplifiers

Takeaway: The AGD Productions Tempo is a cutting-edge amplifier that offers a new take on audiophile amplification and rivals more expensive amplifiers. It can drive speakers easily while being energy efficient.

Video review

Our take on the brand

AGD Productions is an American amplifier maker, founded by Alberto Guerra. The California company's amplifiers use gallium nitride (GaN) MOSFET power stages switching at around 800 kHz, and in the GaNTube models the output stage is housed in a glass tube like a vacuum tube. The tube unplugs, so owners can upgrade to a newer GaNTube without replacing the amplifier. AGD aims for single-ended tube musicality with class D control. AGD's monoblocks are sold in pairs, and the Audion and Vivace are on our All Monoblock Amplifiers list.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page
Parasound
JCM250
6000
/
Released
2024
The Halo JCM250 is an uncompromising mono power amplifier that sets new standards in power and fidelity. With 250 watts at 8 Ω up to 800 watts at 2 Ω, it delivers exceptional audio performance. The balanced XLR and unbalanced RCA inputs ensure compatibility with various audio sources. Its dual-mono design with two transformers provides exceptional channel separation and sonic accuracy. The direct-coupled design, without capacitors in the signal path, preserves signal integrity and enhances transparency.
Check Amazon
Parasound's reference amplifiers are built around the circuits of John Curl, and the JC models are named for him. The American company was founded in San Francisco in 1981 to bring audiophile performance below audiophile prices. The JC and Halo reference lines use dual-mono construction and high-bias Class A/AB output stages, and the JC5 runs its first 12 watts in pure Class A. ZoneMaster and ZCustom amplifiers cover whole-home and custom installations. The Halo HINT6 adds a DAC and phono stage for a one-box system, and the JC1+ heads our All Monoblock Amplifiers list.
Expand Details

Our Summary

Product Strengths

  • Impressive parts quality uses FR408 circuit boards and an R-Core transformer to suppress power line noise
  • The amplifier has a harmonic richness and bloom to the sound that's seductive
  • Bass was tight, controlled, very extended with pitch definition and detailed
  • The amplifier's ability to resolve low level spatial cues is amazing—sound stage layering, image specificity, size and shape are outstanding
  • Excellent build quality includes a heavy duty chassis and heat sinks

Product Considerations

  • It is only available in black

Comparisons (according to reviewers)

  • The JCM250s give a performance very similar to Cambridge Audio JC1 Plus
  • The JCM250 is a bit warmer than the Cambridge Audio Edge M, and includes controls to set bias and gain
  • With the JCM250 monoblocks having a separate power supply for each channel, it has lower noise compared to the Cambridge Audio JC5

Takeaway: The JCM250 is a high-quality amplifier that uses the best components. It offers great versatility, fitting well with any preamp and speakers.

Video review

Our take on the brand

Parasound's reference amplifiers are built around the circuits of John Curl, and the JC models are named for him. The American company was founded in San Francisco in 1981 to bring audiophile performance below audiophile prices. The JC and Halo reference lines use dual-mono construction and high-bias Class A/AB output stages, and the JC5 runs its first 12 watts in pure Class A. ZoneMaster and ZCustom amplifiers cover whole-home and custom installations. The Halo HINT6 adds a DAC and phono stage for a one-box system, and the JC1+ heads our All Monoblock Amplifiers list.
Website author headshot
Julian Shapiro
ExtremeHiFi Writer
Product Page
Product Page

Questions? Ask the brand's dealers.

All Dealers

How to buy

Amplifiers

Search every hifi product

Explore our database of 10,000+ new and 25,000+ used hifi products.